Send/Reports

Invocation and components of the window


To view, interpret and send the scan results you have to switch to the "Send/Reports" window. Simply click the button "Send/Reports" button.



This window displays a list of the scans performed.



In addition, it provides information about when the scan was performed and which hexagrams were found.

At the top on the left there are three bigger symbol buttons which have the following meanings:

Switchover to starting window

By clicking this button you will get to the Home window of Bucher Coaching Systems where among others the chat area is available.


Creating programs as a new transmission without scanning first

If programs are to be sent without scanning first, you can use this button.
The window containing the programs opens. There you can select one or more programs by setting the checkmark.



Afterwards click on "take over" and a new line in the sending list is created.



By clicking the small sending symbol in the list you can send this program as described below ("Opening the sending window").

Execute collective broadcasting for other therapists

By sending collective data of other therapists you can collect credit points for your own collective broadcasts.



Elements of the list in the sending window




On the left there are 5 symbol buttons which have the following meanings:

Open this measurement as print preview and print it.
Open this measurement in the sending window.
Send this measurement by collective broadcasting.
Export this measurement for the import on another computer.
Delete this measurement.

On the right, beside the symbols there is information about the saved measurement data, e.g. date of the measurement, the hexagrams found and the date on which the measurement was sent to the client/patient.



Print Preview / Print


By clicking on the "print preview" you can select which parts of the scan results the print shall contain.

The following window opens:



Here you can select the components of the scan results that you want to print by setting checkmarks on the options. In the "Settings" the user can determine which checkmarks are to be set as a standard.

After clicking "Forward" the print preview is shown.



In the upper part of the "print preview" there are some symbols which have the following meanings:


  • 1st button: Print the print preview
  • 2nd button: Save the pages as PDF
  • 3rd button: Save the pages as PDF and then send them by e-mail (in this case a mail account must be installed).
  • 4th button: Take marked areas of the print preview over to clipboard
  • 5th button: Enlarge view of print preview
  • 6th button: Reduce view of print preview
  • 7th button: Show print preview in normal size
  • 8th button: Show print preview in maximum width
  • 9th button: Show a page of print preview completely
  • 10th button: Juxtapose two pages of print preview




Open sending window


When clicking this window the "sending window" will open in which you can see all scan results and if desired you can also transmit (send) them.



In the upper area you can see the hexagrams suggested by I Ging.



Beneath there is a field showing information about the registers selected above.


Register page "Hexagram"

In the following example you can see information about the hexagram including the Shen formula which you can use very well as an affirmation for your client/patient.




Register page "Acupuncture"

All the acupuncture points recommended for use are listed under the tab "Acupuncture".



Several columns display additional information about the corresponding points.

Information in the acupuncture list

  • The first column ("Active") can be used to denote, with a check-mark, if the corresponding acupuncture point is to be used in a subsequent sessions.
  • The second column ("Acupuncture points") contains the name of each acupuncture point.
  • The third column ("Origin") shows whether the acupuncture point was included in the list based on IGing or as result of the scan. It is also possible for an acupuncture point to have two origins, in which case it is marked with “Both”.
  • The fourth column ("Body side") shows on which side of the body is the point located. There are also meridians in the body center, in which case the key-word “middle” is used.
  • The fifth column ("Pinyin") contains the Chinese name of the acupuncture point.
  • The sixth column ("Regulation") shows the type of activity.

It not only determines which acupuncture points should be used based on IGing and the results, but also their power status is measured, in order to carry out the harmonization.

Energy characteristics of the acupuncture points

  • The acupuncture points are displayed in green if they can be energetically balanced.
  • The acupuncture points are displayed in red if they can have a surplus of energy.
  • The acupuncture points are displayed in blue if they may lack of energy.


Kinds of regulation

The regulation of these energy status is as follows:

  • Green acupuncture points (energetically balanced) – are treated with a green color and a vibrating sound.
  • Red acupuncture points (energy surplus) – the excess energy is drained with blue color and a lowering tone.
  • Blue acupuncture points (energy deficiency) – the missing energy is added with red color and a rising tone.


Display of the program names

Beneath the acupuncture points the selected programs are shown. In the "settings" you can determine that the programs are not shown in case you do not want your client/patient to see them (when he looks onto the screen).


Register page "Meaning"



Depicts the psychosomatic resonance as well as the physical and the psychological importance of the hexagram.


Register page "fractal"



A fractal is calculated on the basis of certain mathematical formula. The fractals of Bucher TAO Medical obtain their individual parameters from the client`s/patient`s data. Moreover all scan results flow into the calculation. The fractal graphic can then be used as an "affirmation image".
If you want to, you can save the fractal in a higher resolution. Thereto you can indicate the width and the height of the graphic to be calculated in pixels.
Moreover you can send the fractal by e-mail to your client/patient, or to Bucher GmbH in order to be published anonymously.


Register page "Additional information"



Here you see the herbal formulas, a homeopathic similar and a Schüssler salt that were found by scanning.


Register page "additional text"

In this field any information can be recorded which will then be considered in the transmission.




Sending range

Using the “Sending range” you can decide if ONLY the points of IGings, or ONLY the points of the findings, or BOTH points groups are to be sent.




Further sending options



The following options influence the transmission as well:
Rapid transfer: Fastest possible transmission speed, eg for the production of essences
File transfer: Transmission of sending data to a file for transmission by an external hardware (eg junction box for Vision Colour lights)
Show programs: Shows or hides the scanned or selected programs in this window
Clear information carrier: Clears all kinds of information carriers before transmission (eg neutral globules, magnetic cards, water, sprays, healing stones)


Transmission time



The transmission time determines in which period the information are sent:
  • Intensive regulation: High transmission speed within a short time
  • Standard regulation: Medium transmission speed within medium time
  • Soft regulation: Slow transmission speed within a long time

In the settings you can determine the individual duration exact to the second for each of the three options.


Transmission type

Allows you to specify the method in which you want to perform the transmission, depending on the connected hardware.
For example, if you have a TAO-Medical tuner connected, you have the following options:

  • Audiovisual point applicator
  • Hand electrodes
  • White noise generator
  • Magnetic card encoder
  • Output cup

If no hardware is connected, you can use the method "Quantum resonance".


Sending using audiovisual point applicator

The "audiovisual point applicator", developed specifically for the TAO Medical tuner (hardware) and for the Bucher Tao Medical (software) is ideally suited for application on the acupuncture points. Just lightly touch the tip of the applicator to trigger the sending with the right color on the right acupuncture point.
The acupuncture points will be executed sequentially, according to the order in which they appear in the table; the table is sorted from the body upper side of the body to the lower side.
In this case, the transmission time is dependent on how quickly the points a processed. You determine the duration by the time you take for letting the audiovisual point applicator on the skin. Only when you take it off and it does no longer touch the skin the next point is activated.
To make this transmission type work your client/patient has to hold the black electrode in his weaker hand (eg a right-hander in his left hand). If he is a "both-hander" it does not matter in which hand he holds the black electrode.


Sending using other options

If there is no audio-visual point applicator available, the sending can also be automated, for example via "Quantum resonance". In this case, the set transmission period applies.


Start transmission



After clicking the "Start program" button, the process is shown on the screen, according to the regulations. The current acupuncture point is displayed on the virtual person.
If it is a green dot, a green color appears in the background of the virtual person during the transmission. An oscillating tone is played at the same time.
If it is a red dot, a blue color appears in the background of the virtual person during the transmission. A lower tone is played at the same time.
If it is a blue dot, a red color appears in the background of the virtual person during the transmission. A higher tone is played at the same time.

When all "active" acupuncture points have been completed, the process is finished.



Upload current client data as collective transmission

You can find a detailed description of the function "collective transmission" here.
This function is the same for all Bucher products.



Export of measurement and client`s data

With this function you can save a measurement together with all information, eg address data and photo, as a separate file.
You can give the file to another user of this product and he can import it then.

Examples of application:

Synchronize data of several computers
You own two or more computers with different data statuses. Now you can save (export) one of the measurements and import it on one of the other computers. So you can synchronize your different data statuses "by hand".

Send measurement data to another user
You can send a client`s/patient`s data to another therapist in order to have the results reviewed by him. The other therapist could also send your data in order to enforce them.



Delete measurement data


In order to delete a measurement you can click on the delete symbol in the corresponding line. A message opens containing the following text: "Do you really want to delete the present measurement?" If you answer by "yes" the measurement will be deleted.
Attention: You cannot reverse this action!