Sales agencies Germany
Sales agencies Switzerland
Sales agencies Austria
Sales agencies Spain
Sales agencies Mexico
Sales agencies Netherlands
Sales agencies North America
Sales agencies Australia
Bucher sales agencies map
english
Deutsch
Español
Schweizer Seite
Sending the Color App entries
Once the scans using the desired apps have been completed, all results show in the playlist.
All entries in the playlist are considered during transmission. Scans from the four apps Organ Database, Color Indication, Color Sequencer and PhoTon 5 are shown in the screenshot below.
All entries from all apps are sent consecutively during transmission.
One can set the speed of the transmission in the transmission duration field:
Units per minute
The default setting for transmission duration is “Units per minute”. This means, that the time values behind each entry in the playlist is shown in minutes. For example, "00:05:00" means that this entry will be sent for a total length of 5 minutes.
Use this setting in cases in which the total length of transmission is consistent with what you had in mind. In the example above this would be 24 minutes.
Units per second
If the transmission duration is set to “Units per second”, all time values are reduced to seconds. The previous setting "00:05:00" taking 5 minutes, now only takes 5 seconds. This is also adjusted on the screen. In this case it will show "00:00:05" now.
Use this setting when the transmission needs to be performed quickly, for example to test the entire playlist or when you intend to transfer the transmission to the output cup in order to transfer the information to Globuli, water or other media.
Intensive-Regulation
If "Intensive-Regulation" is chosen, all time values are recalculated, so that the sum of all entries adds up to 2 minutes. The ratio of duration between each entry remains. Use this setting if you'd like the transmission to occur quickly, yet intensively.
Standard-Regulation
If "Standard-Regulation" is chosen, all time values are recalculated, so that the sum of all entries adds up to 10 minutes.
The ratio of duration between each entry remains. Use this setting if you'd like the transmission to occur within 10 minutes at moderate strength.
Soft-Regulation
If "Standard-Regulation" is chosen, all time values are recalculated, so that the sum of all entries adds up to 30 minutes.
The ratio of duration between each entry remains. Use this setting if you'd like the transmission to occur within 30 minutes at a weaker strength.
Effect at various transmission durations
The effect of the transmission duration is usually identical regardless of its setting. However, in cases of short treatments the client may develop a blockage against the transmission, if he thinks that the treatment was so short, that it won't make a proper difference.
In cases of remote transmission (when the client is not present), the treatment duration is of lesser importance. This is however not the case, when the patient is sitting in front of the device.
Use the transmission options to set the type of hardware and method with which the information is to be transmitted.
The Psycho-Somatic-Tuner was selected with the method Noise-diode in the example above.
The Psycho-Somatic-Tuner for example includes the following transmission options:
Output Cup
Use this option to transfer the information to be transmitted to a medium. In this case it is best to set the transmission duration to “units per second”.
Diode
Use this option when the patient is not at your office. A remote transmission is best done using the “noise diode”. In this case also use a shorter transmission duration.
Hand applicators
Use this option when the client is present and the transmission is to be executed via hand applicators. In this case it is best to use a transmission duration setting of “units per minute”, “standard regulation” or even “soft regulation”.
Special applicators
Use this option to transmit using a physiological coupling, but skin contact is impossible, such as is the case in dogs or cats for example.
Data-Transfer
You may use the "Data-Transfer" option in cases in which you would like to copy the information to be transferred to data storage. The client can then take the data storage (e.g. USB-Stick / SD-Card) with him and perform the transmission himself or herself using personally owned Vision Color hardware.
Usually all transmission information is transferred to all 64 resonance zones, so that the entire body of the virtual person radiates the color to be harmonized.
If however you used one of the following apps during scanning, certain zones are automatically selected and engaged:
These two apps determine the zone to be transmitted to. All other zones are thus excluded and won't be radiated. This becomes visible through the displayed colors in the appropriate zones.
The automatic selection of zones by the two apps enables a better focus on solving the client's problem.
It is also possible to select or deselect particular zones manually. Simply click the desired zone on the virtual person, e.g. the right knee. The zone will then light up and considered in the transmission.
This is especially important in cases in which the client's complaints relate to a specific area of their body. This would be the case if for example the person was suffering from pain in their knee.
You can rotate the person using the scroll bar, thus allowing you to click the desired zone. Alternatively, you may use the buttons with the four sample positions located under the scroll bar.
The following group of buttons gives you further possibilities to engage or disengage certain zones:
The amount of zones described in the zone selection can be engaged or disengaged using the small buttons.
For example, the button ON in the row Front: will engage all zones on the front side of the virtual person.
Clicking the following button will execute the transmission:
The playlist is worked off and all colors and vibrations are transferred to the virtual and the real person.
The following field displays the color currently being transmitted:
If the VISION-COLOUR lamps are connected, they will radiate the same color. If the lamp is located in another room, this field will always show you which color is currently being radiated.
If you'd like to cancel the transmission, simply click the Cancel button on the bottom.
Once the transmission is completed, the title of this button changes from cancel to close. You may then click this button to close the window and return to the analyses list.
All entries in the playlist are considered during transmission. Scans from the four apps Organ Database, Color Indication, Color Sequencer and PhoTon 5 are shown in the screenshot below.
All entries from all apps are sent consecutively during transmission.
Transmission duration
One can set the speed of the transmission in the transmission duration field:
Units per minute
The default setting for transmission duration is “Units per minute”. This means, that the time values behind each entry in the playlist is shown in minutes. For example, "00:05:00" means that this entry will be sent for a total length of 5 minutes.
Use this setting in cases in which the total length of transmission is consistent with what you had in mind. In the example above this would be 24 minutes.
Units per second
If the transmission duration is set to “Units per second”, all time values are reduced to seconds. The previous setting "00:05:00" taking 5 minutes, now only takes 5 seconds. This is also adjusted on the screen. In this case it will show "00:00:05" now.
Use this setting when the transmission needs to be performed quickly, for example to test the entire playlist or when you intend to transfer the transmission to the output cup in order to transfer the information to Globuli, water or other media.
Intensive-Regulation
If "Intensive-Regulation" is chosen, all time values are recalculated, so that the sum of all entries adds up to 2 minutes. The ratio of duration between each entry remains. Use this setting if you'd like the transmission to occur quickly, yet intensively.
Standard-Regulation
If "Standard-Regulation" is chosen, all time values are recalculated, so that the sum of all entries adds up to 10 minutes.
The ratio of duration between each entry remains. Use this setting if you'd like the transmission to occur within 10 minutes at moderate strength.
Soft-Regulation
If "Standard-Regulation" is chosen, all time values are recalculated, so that the sum of all entries adds up to 30 minutes.
The ratio of duration between each entry remains. Use this setting if you'd like the transmission to occur within 30 minutes at a weaker strength.
Effect at various transmission durations
The effect of the transmission duration is usually identical regardless of its setting. However, in cases of short treatments the client may develop a blockage against the transmission, if he thinks that the treatment was so short, that it won't make a proper difference.
In cases of remote transmission (when the client is not present), the treatment duration is of lesser importance. This is however not the case, when the patient is sitting in front of the device.
Transmission options
Use the transmission options to set the type of hardware and method with which the information is to be transmitted.
The Psycho-Somatic-Tuner was selected with the method Noise-diode in the example above.
The Psycho-Somatic-Tuner for example includes the following transmission options:
Output Cup
Use this option to transfer the information to be transmitted to a medium. In this case it is best to set the transmission duration to “units per second”.
Diode
Use this option when the patient is not at your office. A remote transmission is best done using the “noise diode”. In this case also use a shorter transmission duration.
Hand applicators
Use this option when the client is present and the transmission is to be executed via hand applicators. In this case it is best to use a transmission duration setting of “units per minute”, “standard regulation” or even “soft regulation”.
Special applicators
Use this option to transmit using a physiological coupling, but skin contact is impossible, such as is the case in dogs or cats for example.
Data-Transfer
You may use the "Data-Transfer" option in cases in which you would like to copy the information to be transferred to data storage. The client can then take the data storage (e.g. USB-Stick / SD-Card) with him and perform the transmission himself or herself using personally owned Vision Color hardware.
Zone selection
Usually all transmission information is transferred to all 64 resonance zones, so that the entire body of the virtual person radiates the color to be harmonized.
If however you used one of the following apps during scanning, certain zones are automatically selected and engaged:
- VISION-COLOUR Revision
- PhoTon 5
These two apps determine the zone to be transmitted to. All other zones are thus excluded and won't be radiated. This becomes visible through the displayed colors in the appropriate zones.
The automatic selection of zones by the two apps enables a better focus on solving the client's problem.
It is also possible to select or deselect particular zones manually. Simply click the desired zone on the virtual person, e.g. the right knee. The zone will then light up and considered in the transmission.
This is especially important in cases in which the client's complaints relate to a specific area of their body. This would be the case if for example the person was suffering from pain in their knee.
You can rotate the person using the scroll bar, thus allowing you to click the desired zone. Alternatively, you may use the buttons with the four sample positions located under the scroll bar.
The following group of buttons gives you further possibilities to engage or disengage certain zones:
The amount of zones described in the zone selection can be engaged or disengaged using the small buttons.
For example, the button ON in the row Front: will engage all zones on the front side of the virtual person.
Execute transmission
Clicking the following button will execute the transmission:
The playlist is worked off and all colors and vibrations are transferred to the virtual and the real person.
The following field displays the color currently being transmitted:
If the VISION-COLOUR lamps are connected, they will radiate the same color. If the lamp is located in another room, this field will always show you which color is currently being radiated.
If you'd like to cancel the transmission, simply click the Cancel button on the bottom.
Once the transmission is completed, the title of this button changes from cancel to close. You may then click this button to close the window and return to the analyses list.